Structural analysis of a mounted moldboard plow using the finite element simulation method

Structural analysis of a mounted moldboard plow using the finite element simulation method

Blog Article

Aim of study: Structural analysis of a mounted moldboard plow to redesign and optimise its frame.Area of study: Shahrekord, Iran Material and methods: In this study, a complete modeling of a three-bottom moldboard plow was conducted in Solid work 2016 and then, plow-soil interaction model developed in Abaqus 2018.The FEM-simulated draft was compared with the sled shelf draft calculated by the analytical model.Main results: The maximum stress and displacement in chassis were determined under different work conditions.The attachment points of the crossbar to the two-lower links of the three-point hitch, the middle of the bottom standard, the head points of the brace and the attachment point of iphone 14 price chicago the mast to the top link of the three-point hitch needed to be redesigned.

As a result, higher safety factor ranging 2.5-3 is recommended for the mentioned unsafe places.Research highlights: The obtained results could be used for further studies on the optimization of the moldboard plow frame.